Dante Solar Power Information & Peak Sun Hours

Solar Green Energy Summary for Dante, South Dakota

Lattitude: 43.0399

Sunlight

Fixed Tilt Sunlight Hours: 4.5 hours per day

1-Axis Tilt Sunlight Hours: 5.9 hours per day

2-Axis Tilt Sunlight Hours: 6.5 hours per day

The average peak sun hours of Dante is a crucial measurable component needed to efficiently implement a solar power system in a home or business. Put simply, peak sun hours are the hours of sunlight a day that are strong enough to be efficiently absorbed by solar panels and eventually turned into usable electricity. Not every minute of sunlight during a day is strong enough to be useful to a solar power system. Think about just minutes after the sunrises, which officially counts towards total hours of sunlight, but is usually too weak to be counted in peak sun hours because the strength of the solar insolation is not strong enough near the horizon to be absorbed and turned into electricity at an efficient rate. Times during the day like this, where the sun is out but not strong enough, are not counted as peak sun hours. In other words, the amount of peak sun hours in a location will theoretically always be less than total sunlight hours for a given day.

If you open the newspaper in the morning or watch the weather channel on the news you can get an accurate prediction of sunrise and sunset each day for Dante. However, still knowing that the latitude of Dante is 43.0 can be a helpful number for your solar panel setup and planning. The closer your latitude is to zero the closer you are to the equator. At the equator you find the most consistent total sunlight hours throughout any given day of the year. As your latitude increases you can see larger discrepancies of daily sunlight hours during the year. For example, having very long summer days and very short and dark winter days

Throughout the day the sun obviously moves throughout the Dante sky. The suns position in the sky also changes throughout the year with the seasons. A fixed solar panel does not accommodate for these changes. However, a 1-axis panel rotates and follows the sun’s path during the day. A 2-axis panel both follows the sun’s daily path as well as the seasonal differences

Another reason to consider average peak sun hours is because weather can dramatically affect the day-to-day output of solar panels. It goes without saying that a dark stormy day will produce less output than a clear sunny day. Looking at a yearly average helps account for these daily variables.

We can use previous years of data to estimate the amount of peak sun hours in Dante. A fixed tilt mount for example will receive 4.5 average hours per day. For more efficiency for your system in Dante you could use a 1-axis tracking mount and increase your daily peak sun average to 5.9 hours, or even further with a 2-axis panel to get an average of 6.5 hours.


Solar Businesses in Dante, South Dakota




Leave a Reply

Your email address will not be published. Required fields are marked *