Home » Solar Turbine » Alabama » Tanner

When trying to calculate your solar power needs there are a variety of factors to consider. Panel type and location, electricity needs, number of panels needed etc. One key to figuring out the math is factoring in the average peak sunlight hours in a day. Unlike total sunlight hours, peak sunlight hours are only when the sun is strong enough to power your solar panel. Using this number can help determine your needs to power your home or business in Tanner, Alabama.

Knowing that the latitude of Tanner is 34.7 can be helpful for understanding total sunlight hour variance. As you approach the equator latitude approaches zero. The closer the latitude is to zero, the more consistent the daily sunlight hours are throughout the year. Total sunlight hour consistency simply makes planning for your solar power needs easier, but it is certainly not a requirement.

A tracking mount will increase the average peak sun hours for a solar power system. Think about a panel that is tracking the sun in the sky vs a panel that is fixed and not moving: you will see a higher efficiency ratio of productions. A 1-axis mount will track the sun from East to West from sunrise to sunset and move on a single axis of rotation. A 2-axis mount will track the Sun from East to West the same as a 1-axis mount would, but it will also track the angle of the sun in the sky as it slowly varies season to season. A 2-axis mount is more necessary in high latitude regions where the angle of the sun in the sky changes dramatically between each equinox.

Peak sun hours are greatly affected by weather patterns. Cloud coverage is a huge factor in peak sun hours per day because heavy cloud coverage will diminish the power of the solar insolation. You can use historical climate data to estimate average cloud and weather coverage, but it will obviously vary slightly from year to year.

In Tanner the average yearly peak sun hours for a fixed tilt non-tracking solar panel mount is 4.9. This is for a fixed panel mounted at an angle that is equal to the latitude of the location for the entire year. The amount of peak sun hours increases to 6.1 hours if you are using a 1-axis panel, and to 6.2 hours if you upgrade to a 2-axis solar panel.