Home » Solar Turbine » Nebraska » Craig

Peak sun hours is one of the most important criteria to examine when considering installing a solar power system. Peak sun hours are different than total sunlight hours in a day because the strength of the radiation of the sun varies throughout the day. For example, during sunrise and sunset the solar insolation from the sun is less powerful than at noon. For a moment of sunshine to be considered a peak sun hour the intensity needs to be at least 1 kilowatt per square meter. This means that a square meter of your solar panel should be receiving 1 kilowatt of energy from the sun. This number is used because it is an amount of light that allows a solar panel to produce output efficiently and not under perform due to lack of sunlight power.

The equator has a latitude of zero while Craig has a latitude of 41.8. Any city located on the equator will receive the most sunlight throughout the year because the sunlight arrives at a perpendicular 90 degree angle to the earth at the equator. The further you are from the equator the more your daily sunlight hours can vary.

Throughout the day the sun obviously moves throughout the Craig sky. The suns position in the sky also changes throughout the year with the seasons. A fixed solar panel does not accommodate for these changes. However, a 1-axis panel rotates and follows the sun’s path during the day. A 2-axis panel both follows the sun’s daily path as well as the seasonal differences

There are more variables than latitude that can change average peak sun hours. Weather patterns and geography will influence solar insolation that reaches your system. Thick grey storm clouds for example will block out a lot of the sun to the point where there may be no peak sun hours in the middle of the day when the sun is usually very powerful. Trees and mountains can deflect the sunlight, so be sure your solar panel is selectively placed.

For Craig the number of average daily peak sunlight hours for a fixed solar panel is 5.3 hours. If you are using a more efficient 1 or 2-axis panel then the number will increase to 6.9 hours for a 1-axis panel and 7.2 hours for a 2-axis panel.