Bergholtz Solar Power Information & Peak Sun Hours

Solar Green Energy Summary for Bergholtz, New York

Lattitude: 43.1031

Sunlight

Fixed Tilt Sunlight Hours: 4.1 hours per day

1-Axis Tilt Sunlight Hours: 5.2 hours per day

2-Axis Tilt Sunlight Hours: 5.4 hours per day

The average peak sun hours of Bergholtz is a crucial measurable component needed to efficiently implement a solar power system in a home or business. Put simply, peak sun hours are the hours of sunlight a day that are strong enough to be efficiently absorbed by solar panels and eventually turned into usable electricity. Not every minute of sunlight during a day is strong enough to be useful to a solar power system. Think about just minutes after the sunrises, which officially counts towards total hours of sunlight, but is usually too weak to be counted in peak sun hours because the strength of the solar insolation is not strong enough near the horizon to be absorbed and turned into electricity at an efficient rate. Times during the day like this, where the sun is out but not strong enough, are not counted as peak sun hours. In other words, the amount of peak sun hours in a location will theoretically always be less than total sunlight hours for a given day.

Knowing the latitude of Bergholtz will help estimate average peak sun hours for your area. The latitude is used to accurately estimate the time of sunrise and sunset, thus giving you the total hours of daylight each day. Once you know the total hours of daylight, you can estimate the amount of peak sun hours based on a number of variables such as weather, time of year, the angle of the solar panel.

Throughout the day the sun obviously moves throughout the Bergholtz sky. The suns position in the sky also changes throughout the year with the seasons. A fixed solar panel does not accommodate for these changes. However, a 1-axis panel rotates and follows the sun’s path during the day. A 2-axis panel both follows the sun’s daily path as well as the seasonal differences

The sun is a great ball of gas that rises and sets every day that the earth rotates while in orbit around the sun. Barring any major disasters this is a very predictable occurance every day. Latitude helps predict this even more, narrowing it down to the minute for sunrise and sunset. But some things aren’t as predictable that will greatly influence the efficiency of solar panels. Weather and cloud coverage for example can greatly diminish peak sun hours on any given day. Thick storm clouds will block a high percentage of the sun's rays, resulting in lower output of your solar panels. Weather needs to be factored into deciding when to use your system, or how much output one expects to get.

For Bergholtz the number of average daily peak sunlight hours for a fixed solar panel is 4.1 hours. If you are using a more efficient 1 or 2-axis panel then the number will increase to 5.2 hours for a 1-axis panel and 5.4 hours for a 2-axis panel.


Solar Businesses in Bergholtz, New York




Leave a Reply

Your email address will not be published. Required fields are marked *