Delaware Solar Power Information & Peak Sun Hours
Solar Green Energy Summary for Delaware, Ohio
Fixed Tilt Sunlight Hours: 4.3 hours per day
1-Axis Tilt Sunlight Hours: 5.2 hours per day
2-Axis Tilt Sunlight Hours: 5.6 hours per day
It goes without saying that throughout the year the amount of sunlight in any given day is going to vary. The time of year and weather will have a strong influence on daily sunshine. Looking at the average amount of peak sunshine hours in a day during an entire year stretch is a valuable exercise when trying to determine the amount and type of solar panels you need to install to power your business or your home. 4.3 peak sun hours means that in Delaware on average there are 4.3 hours a day where the sun is strong enough for solar panels to harness its energy. This number is less than the amount of total sunlight hours in a day because there are times during the day (ex. sunrise and sunset) where the sun is not strong enough to benefit solar panels.
If you open the newspaper in the morning or watch the weather channel on the news you can get an accurate prediction of sunrise and sunset each day for Delaware. However, still knowing that the latitude of Delaware is 40.3 can be a helpful number for your solar panel setup and planning. The closer your latitude is to zero the closer you are to the equator. At the equator you find the most consistent total sunlight hours throughout any given day of the year. As your latitude increases you can see larger discrepancies of daily sunlight hours during the year. For example, having very long summer days and very short and dark winter days
They type of solar panel you use has an affect on the average peak sunlight hours. Some panels allow for movement, so they can track the sun as it rises in the east and sets in the west, or as the seasons change and the sun's path changes. A fixed panel remains fixed and does not have the ability to rotate, whereas a 1-axis and 2-axis panel can adjust with the sun.
Although weather predicting technology has greatly evolved over time, it is still a rather unpredictable factor that will affect the amount of peak sun hours your solar power system will receive. Cloudy days for example will usually have lower peak sun hours that a clear sunny day. And areas that usually have more average sunny days per year will probably have higher peak sun hours that areas that are often overcast or stormy.
We can use previous years of data to estimate the amount of peak sun hours in Delaware. A fixed tilt mount for example will receive 4.3 average hours per day. For more efficiency for your system in Delaware you could use a 1-axis tracking mount and increase your daily peak sun average to 5.2 hours, or even further with a 2-axis panel to get an average of 5.6 hours.