Landen Solar Power Information & Peak Sun Hours
Solar Green Energy Summary for Landen, Ohio
Fixed Tilt Sunlight Hours: 4.4 hours per day
1-Axis Tilt Sunlight Hours: 5.5 hours per day
2-Axis Tilt Sunlight Hours: 5.4 hours per day
Looking at the average peak sunlight hours in Landen is a valuable number for determining your solar power setup. Peak sunlight hours are only the hours a day in which the sunlight is strong enough for the solar panels to do their job. Not every hour of sunlight was created equal. For example, solar panels do not provide much use during early sunrise and sunset, and therefore you should not look at total hours of sunlight in a day, but instead focus on peak sunlight hours. Using this number will provide a much better estimate of your needs for setting up panels in Landen, Ohio.
Sunlight hits the earth directly at the equator. This is why the equator has a latitude of zero degrees. The latitude of Landen is 39.3. Knowing the latitude of Landen can help you plan for your solar panel setup, as the larger the latitude the more variance you will see throughout the year for total daily sunlight hours.
Throughout the day the sun obviously moves throughout the Landen sky. The suns position in the sky also changes throughout the year with the seasons. A fixed solar panel does not accommodate for these changes. However, a 1-axis panel rotates and follows the sun’s path during the day. A 2-axis panel both follows the sun’s daily path as well as the seasonal differences
Climate in your geographical region is a major factor that will influence average peak sun hours per year. If you live in a region that does not have a lot of completely sunny days, then cloud coverage will greatly influence solar insolation on any given day. Mountains and trees may also contribute to lower solar insolation if they block the sun from your panels at any given point of the day.
For Landen the number of average daily peak sunlight hours for a fixed solar panel is 4.4 hours. If you are using a more efficient 1 or 2-axis panel then the number will increase to 5.5 hours for a 1-axis panel and 5.4 hours for a 2-axis panel.