Marlboro Solar Power Information & Peak Sun Hours
Solar Green Energy Summary for Marlboro, Ohio
Fixed Tilt Sunlight Hours: 4.1 hours per day
1-Axis Tilt Sunlight Hours: 5.1 hours per day
2-Axis Tilt Sunlight Hours: 5.6 hours per day
The average peak sun hours of Marlboro is a crucial measurable component needed to efficiently implement a solar power system in a home or business. Put simply, peak sun hours are the hours of sunlight a day that are strong enough to be efficiently absorbed by solar panels and eventually turned into usable electricity. Not every minute of sunlight during a day is strong enough to be useful to a solar power system. Think about just minutes after the sunrises, which officially counts towards total hours of sunlight, but is usually too weak to be counted in peak sun hours because the strength of the solar insolation is not strong enough near the horizon to be absorbed and turned into electricity at an efficient rate. Times during the day like this, where the sun is out but not strong enough, are not counted as peak sun hours. In other words, the amount of peak sun hours in a location will theoretically always be less than total sunlight hours for a given day.
Although you can easily predict sunrise and sunset hours each day to the minute, looking at latitude can help with your solar planning. The closer you get to the equator the closer your latitude gets to zero. Sunlight hours on the equator are consistent throughout the entire year. Places further from the equator can have large variance in daily sunlight. For example higher latitudes can have very long summer days with lots of sunlight and very dark winters. The latitude of Marlboro is 41.0.
Although most things are out of our control, like the sunrise, sunset or the weather, we can control the angle and the kind of mount we use for a solar panel. The angle of the solar panel, if using a fixed mount, should generally be around the angle that is equal to the latitude of the location to maximize output. In the northern hemisphere, panels angles should be lower in the winter months and higher in the summer months As a fixed mount is set, it is ideal to place it at an angle that will capture the most sunlight during the year. A 1-axis tracking solar mount will track the sun across the sky from sunrise to sunset, but the angle will remain the same throughout the day. A 2-axis solar mount will track the sun throughout the day from East to West, but the angle will also change automatically as the seasons change and the angle of the sun in the sky changes. Thus, a 2-axis will have a higher rating of peak sun hours compared to the 1-axis or fixed.
Climate in your geographical region is a major factor that will influence average peak sun hours per year. If you live in a region that does not have a lot of completely sunny days, then cloud coverage will greatly influence solar insolation on any given day. Mountains and trees may also contribute to lower solar insolation if they block the sun from your panels at any given point of the day.
By taking the latitude of Marlboro one can get a close estimate of the amount of average peak sun hours per day for the geographical area. It varies with technology and the type of solar panel mount you use, but for a fixed mount solar panel in Marlboro one can expect close to 4.1 average peak sun hours per day. With a 1-axis tracking mount you would get 5.1 hours per day, and 5.6 hours per day with a 2-axis tracking mount that tracks the sun everywhere in the sky.