Daniels Solar Power Information & Peak Sun Hours
Solar Green Energy Summary for Daniels, West Virginia
Fixed Tilt Sunlight Hours: 4.7 hours per day
1-Axis Tilt Sunlight Hours: 5.6 hours per day
2-Axis Tilt Sunlight Hours: 6.4 hours per day
The average peak sun hours of Daniels is a crucial measurable component needed to efficiently implement a solar power system in a home or business. Put simply, peak sun hours are the hours of sunlight a day that are strong enough to be efficiently absorbed by solar panels and eventually turned into usable electricity. Not every minute of sunlight during a day is strong enough to be useful to a solar power system. Think about just minutes after the sunrises, which officially counts towards total hours of sunlight, but is usually too weak to be counted in peak sun hours because the strength of the solar insolation is not strong enough near the horizon to be absorbed and turned into electricity at an efficient rate. Times during the day like this, where the sun is out but not strong enough, are not counted as peak sun hours. In other words, the amount of peak sun hours in a location will theoretically always be less than total sunlight hours for a given day.
Although you can easily predict sunrise and sunset hours each day to the minute, looking at latitude can help with your solar planning. The closer you get to the equator the closer your latitude gets to zero. Sunlight hours on the equator are consistent throughout the entire year. Places further from the equator can have large variance in daily sunlight. For example higher latitudes can have very long summer days with lots of sunlight and very dark winters. The latitude of Daniels is 37.7.
You will notice the difference in peak sunlight hours depending on the panel type. The more flexibility the solar panel has the efficient it can be throughout the day and the year. A fixed solar panel remains in the same position at all times. A 1-axis panel follows the sun throughout the day as it moves through the sky and eventually sets. A 2-axis panel not only tracks the daily movement, but also adjusts based on the sun's changing position in the sky throughout the year as the seasons change.
The sun is a great ball of gas that rises and sets every day that the earth rotates while in orbit around the sun. Barring any major disasters this is a very predictable occurance every day. Latitude helps predict this even more, narrowing it down to the minute for sunrise and sunset. But some things aren’t as predictable that will greatly influence the efficiency of solar panels. Weather and cloud coverage for example can greatly diminish peak sun hours on any given day. Thick storm clouds will block a high percentage of the sun's rays, resulting in lower output of your solar panels. Weather needs to be factored into deciding when to use your system, or how much output one expects to get.
In Daniels the average yearly peak sun hours for a fixed tilt non-tracking solar panel mount is 4.7. This is for a fixed panel mounted at an angle that is equal to the latitude of the location for the entire year. The amount of peak sun hours increases to 5.6 hours if you are using a 1-axis panel, and to 6.4 hours if you upgrade to a 2-axis solar panel.