Glen Ferris Solar Power Information & Peak Sun Hours
Solar Green Energy Summary for Glen Ferris, West Virginia
Fixed Tilt Sunlight Hours: 4.2 hours per day
1-Axis Tilt Sunlight Hours: 5.4 hours per day
2-Axis Tilt Sunlight Hours: 5.7 hours per day
When trying to calculate your solar power needs there are a variety of factors to consider. Panel type and location, electricity needs, number of panels needed etc. One key to figuring out the math is factoring in the average peak sunlight hours in a day. Unlike total sunlight hours, peak sunlight hours are only when the sun is strong enough to power your solar panel. Using this number can help determine your needs to power your home or business in Glen Ferris, West Virginia.
The latitude at the equator of the earth is zero degrees. This is where sunlight strikes the earth most directly. Due to the earth's curved shape, sunlight hits at a various angles depending on location. As latitude increases, the further you are located from the equator and more variance you see in sunlight hours. The latitude of Glen Ferris is 38.2.
You will notice that the average peak sun hours for Glen Ferris change based on the type of panel being used. The reason for this is quite simple. A fixed panel does exactly what it sounds like, remains fixed in one position at all times. A 1-axis and 2-axis panels have axis that allow them to rotate. The 1-axis rotates with the sun's daily east to west movement while a 2-axis also adjusts for seasonal changes.
There are more variables than latitude that can change average peak sun hours. Weather patterns and geography will influence solar insolation that reaches your system. Thick grey storm clouds for example will block out a lot of the sun to the point where there may be no peak sun hours in the middle of the day when the sun is usually very powerful. Trees and mountains can deflect the sunlight, so be sure your solar panel is selectively placed.
For Glen Ferris the number of average daily peak sunlight hours for a fixed solar panel is 4.2 hours. If you are using a more efficient 1 or 2-axis panel then the number will increase to 5.4 hours for a 1-axis panel and 5.7 hours for a 2-axis panel.