Newville Solar Power Information & Peak Sun Hours

Solar Green Energy Summary for Newville, Alabama

Lattitude: 31.4206

Sunlight

Fixed Tilt Sunlight Hours: 5 hours per day

1-Axis Tilt Sunlight Hours: 6.2 hours per day

2-Axis Tilt Sunlight Hours: 6.3 hours per day

Peak sun hours is one of the most important criteria to examine when considering installing a solar power system. Peak sun hours are different than total sunlight hours in a day because the strength of the radiation of the sun varies throughout the day. For example, during sunrise and sunset the solar insolation from the sun is less powerful than at noon. For a moment of sunshine to be considered a peak sun hour the intensity needs to be at least 1 kilowatt per square meter. This means that a square meter of your solar panel should be receiving 1 kilowatt of energy from the sun. This number is used because it is an amount of light that allows a solar panel to produce output efficiently and not under perform due to lack of sunlight power.

The latitude at the equator of the earth is zero degrees. This is where sunlight strikes the earth most directly. Due to the earth's curved shape, sunlight hits at a various angles depending on location. As latitude increases, the further you are located from the equator and more variance you see in sunlight hours. The latitude of Newville is 31.4.

Since a fixed solar panel is set in one position it is ideal to place it at an angle that will expose the panel to the most sunlight throughout the year. This angle is generally the same angle of your latitude which is 31.4 for Newville. You do not need to strategically place a 1-axis or 2-axis panel as much as you do a fixed panel. A 1-axis panel follows the movement of the sun during the day. Additionally, a 2-axis panel also adjusts for the suns various positions in the sky throughout the year.

Another reason to consider average peak sun hours is because weather can dramatically affect the day-to-day output of solar panels. It goes without saying that a dark stormy day will produce less output than a clear sunny day. Looking at a yearly average helps account for these daily variables.

We can use previous years of data to estimate the amount of peak sun hours in Newville. A fixed tilt mount for example will receive 5 average hours per day. For more efficiency for your system in Newville you could use a 1-axis tracking mount and increase your daily peak sun average to 6.2 hours, or even further with a 2-axis panel to get an average of 6.3 hours.


Solar Businesses in Newville, Alabama




Leave a Reply

Your email address will not be published. Required fields are marked *