Bloomington Solar Power Information & Peak Sun Hours

Solar Green Energy Summary for Bloomington, California

Lattitude: 34.0604

Sunlight

Fixed Tilt Sunlight Hours: 6.2 hours per day

1-Axis Tilt Sunlight Hours: 7 hours per day

2-Axis Tilt Sunlight Hours: 8.3 hours per day

It goes without saying that throughout the year the amount of sunlight in any given day is going to vary. The time of year and weather will have a strong influence on daily sunshine. Looking at the average amount of peak sunshine hours in a day during an entire year stretch is a valuable exercise when trying to determine the amount and type of solar panels you need to install to power your business or your home. 6.2 peak sun hours means that in Bloomington on average there are 6.2 hours a day where the sun is strong enough for solar panels to harness its energy. This number is less than the amount of total sunlight hours in a day because there are times during the day (ex. sunrise and sunset) where the sun is not strong enough to benefit solar panels.

If you’re using a fixed axis and fixed tilt solar panel, the ideal angle of the panel mount should be set at an angle equal to or close to the latitude of the location of the panel. Latitude is a valuable measurement to use when figuring how many daylight hours and the angle of the sun in the sky for your location. Since at locations with a higher latitude the sun will find itself at more variable angles in the sky throughout the year it is important to set the angle of the panel correctly and efficiently capture more peak sun hours. In the Northern Hemisphere the sun will be at lower angles in the Southern sky in the winter, and higher angles during the summer months, so the angle of the panel is crucial when trying to maximize output.

A tracking mount will increase the average peak sun hours for a solar power system. Think about a panel that is tracking the sun in the sky vs a panel that is fixed and not moving: you will see a higher efficiency ratio of productions. A 1-axis mount will track the sun from East to West from sunrise to sunset and move on a single axis of rotation. A 2-axis mount will track the Sun from East to West the same as a 1-axis mount would, but it will also track the angle of the sun in the sky as it slowly varies season to season. A 2-axis mount is more necessary in high latitude regions where the angle of the sun in the sky changes dramatically between each equinox.

Climate in your geographical region is a major factor that will influence average peak sun hours per year. If you live in a region that does not have a lot of completely sunny days, then cloud coverage will greatly influence solar insolation on any given day. Mountains and trees may also contribute to lower solar insolation if they block the sun from your panels at any given point of the day.

In Bloomington the average yearly peak sun hours for a fixed tilt non-tracking solar panel mount is 6.2. This is for a fixed panel mounted at an angle that is equal to the latitude of the location for the entire year. The amount of peak sun hours increases to 7 hours if you are using a 1-axis panel, and to 8.3 hours if you upgrade to a 2-axis solar panel.


Solar Businesses in Bloomington, California




Leave a Reply

Your email address will not be published. Required fields are marked *