Tampa Solar Power Information & Peak Sun Hours

Solar Green Energy Summary for Tampa, Kansas

Lattitude: 38.5481

Sunlight

Fixed Tilt Sunlight Hours: 5.5 hours per day

1-Axis Tilt Sunlight Hours: 6.8 hours per day

2-Axis Tilt Sunlight Hours: 7.1 hours per day

Peak sun hours is one of the most important criteria to examine when considering installing a solar power system. Peak sun hours are different than total sunlight hours in a day because the strength of the radiation of the sun varies throughout the day. For example, during sunrise and sunset the solar insolation from the sun is less powerful than at noon. For a moment of sunshine to be considered a peak sun hour the intensity needs to be at least 1 kilowatt per square meter. This means that a square meter of your solar panel should be receiving 1 kilowatt of energy from the sun. This number is used because it is an amount of light that allows a solar panel to produce output efficiently and not under perform due to lack of sunlight power.

Although you can easily predict sunrise and sunset hours each day to the minute, looking at latitude can help with your solar planning. The closer you get to the equator the closer your latitude gets to zero. Sunlight hours on the equator are consistent throughout the entire year. Places further from the equator can have large variance in daily sunlight. For example higher latitudes can have very long summer days with lots of sunlight and very dark winters. The latitude of Tampa is 38.5.

You will notice the difference in peak sunlight hours depending on the panel type. The more flexibility the solar panel has the efficient it can be throughout the day and the year. A fixed solar panel remains in the same position at all times. A 1-axis panel follows the sun throughout the day as it moves through the sky and eventually sets. A 2-axis panel not only tracks the daily movement, but also adjusts based on the sun's changing position in the sky throughout the year as the seasons change.

Climate in your geographical region is a major factor that will influence average peak sun hours per year. If you live in a region that does not have a lot of completely sunny days, then cloud coverage will greatly influence solar insolation on any given day. Mountains and trees may also contribute to lower solar insolation if they block the sun from your panels at any given point of the day.

For Tampa the number of average daily peak sunlight hours for a fixed solar panel is 5.5 hours. If you are using a more efficient 1 or 2-axis panel then the number will increase to 6.8 hours for a 1-axis panel and 7.1 hours for a 2-axis panel.


Helpful & Interesting

After water changes from a liquid to a gas (at 212 degrees Fahrenheit) it can actually heat up much hotter than that. In the gas form, water molecules are spread out and have a lot of room to move and get much hotter than the other two phases (liquid and ice). And water freezes at 32 degrees Fahrenheit.


Solar Businesses in Tampa, Kansas




Leave a Reply

Your email address will not be published. Required fields are marked *