Belcamp Solar Power Information & Peak Sun Hours
Solar Green Energy Summary for Belcamp, Maryland
Fixed Tilt Sunlight Hours: 4.8 hours per day
1-Axis Tilt Sunlight Hours: 5.7 hours per day
2-Axis Tilt Sunlight Hours: 6.4 hours per day
Peak sun hours is one of the most important criteria to examine when considering installing a solar power system. Peak sun hours are different than total sunlight hours in a day because the strength of the radiation of the sun varies throughout the day. For example, during sunrise and sunset the solar insolation from the sun is less powerful than at noon. For a moment of sunshine to be considered a peak sun hour the intensity needs to be at least 1 kilowatt per square meter. This means that a square meter of your solar panel should be receiving 1 kilowatt of energy from the sun. This number is used because it is an amount of light that allows a solar panel to produce output efficiently and not under perform due to lack of sunlight power.
If you open the newspaper in the morning or watch the weather channel on the news you can get an accurate prediction of sunrise and sunset each day for Belcamp. However, still knowing that the latitude of Belcamp is 39.5 can be a helpful number for your solar panel setup and planning. The closer your latitude is to zero the closer you are to the equator. At the equator you find the most consistent total sunlight hours throughout any given day of the year. As your latitude increases you can see larger discrepancies of daily sunlight hours during the year. For example, having very long summer days and very short and dark winter days
Throughout the day the sun obviously moves throughout the Belcamp sky. The suns position in the sky also changes throughout the year with the seasons. A fixed solar panel does not accommodate for these changes. However, a 1-axis panel rotates and follows the sun’s path during the day. A 2-axis panel both follows the sun’s daily path as well as the seasonal differences
Peak sun hours are greatly affected by weather patterns. Cloud coverage is a huge factor in peak sun hours per day because heavy cloud coverage will diminish the power of the solar insolation. You can use historical climate data to estimate average cloud and weather coverage, but it will obviously vary slightly from year to year.
For Belcamp the number of average daily peak sunlight hours for a fixed solar panel is 4.8 hours. If you are using a more efficient 1 or 2-axis panel then the number will increase to 5.7 hours for a 1-axis panel and 6.4 hours for a 2-axis panel.