Croom Solar Power Information & Peak Sun Hours
Solar Green Energy Summary for Croom, Maryland
Fixed Tilt Sunlight Hours: 4.4 hours per day
1-Axis Tilt Sunlight Hours: 5.6 hours per day
2-Axis Tilt Sunlight Hours: 6.3 hours per day
Peak sun hours is one of the most important criteria to examine when considering installing a solar power system. Peak sun hours are different than total sunlight hours in a day because the strength of the radiation of the sun varies throughout the day. For example, during sunrise and sunset the solar insolation from the sun is less powerful than at noon. For a moment of sunshine to be considered a peak sun hour the intensity needs to be at least 1 kilowatt per square meter. This means that a square meter of your solar panel should be receiving 1 kilowatt of energy from the sun. This number is used because it is an amount of light that allows a solar panel to produce output efficiently and not under perform due to lack of sunlight power.
Knowing that the latitude of Croom is 38.7 can be helpful for understanding total sunlight hour variance. As you approach the equator latitude approaches zero. The closer the latitude is to zero, the more consistent the daily sunlight hours are throughout the year. Total sunlight hour consistency simply makes planning for your solar power needs easier, but it is certainly not a requirement.
You will notice that the average peak sun hours for Croom change based on the type of panel being used. The reason for this is quite simple. A fixed panel does exactly what it sounds like, remains fixed in one position at all times. A 1-axis and 2-axis panels have axis that allow them to rotate. The 1-axis rotates with the sun's daily east to west movement while a 2-axis also adjusts for seasonal changes.
Although weather predicting technology has greatly evolved over time, it is still a rather unpredictable factor that will affect the amount of peak sun hours your solar power system will receive. Cloudy days for example will usually have lower peak sun hours that a clear sunny day. And areas that usually have more average sunny days per year will probably have higher peak sun hours that areas that are often overcast or stormy.
We can use previous years of data to estimate the amount of peak sun hours in Croom. A fixed tilt mount for example will receive 4.4 average hours per day. For more efficiency for your system in Croom you could use a 1-axis tracking mount and increase your daily peak sun average to 5.6 hours, or even further with a 2-axis panel to get an average of 6.3 hours.