Fairview Solar Power Information & Peak Sun Hours

Solar Green Energy Summary for Fairview, Oregon

Lattitude: 45.5471

Sunlight

Fixed Tilt Sunlight Hours: 4.5 hours per day

1-Axis Tilt Sunlight Hours: 5 hours per day

2-Axis Tilt Sunlight Hours: 6.7 hours per day

Peak sun hours is one of the most important criteria to examine when considering installing a solar power system. Peak sun hours are different than total sunlight hours in a day because the strength of the radiation of the sun varies throughout the day. For example, during sunrise and sunset the solar insolation from the sun is less powerful than at noon. For a moment of sunshine to be considered a peak sun hour the intensity needs to be at least 1 kilowatt per square meter. This means that a square meter of your solar panel should be receiving 1 kilowatt of energy from the sun. This number is used because it is an amount of light that allows a solar panel to produce output efficiently and not under perform due to lack of sunlight power.

The latitude of the location is important for measuring peak sun hours. The latitude determines how much overall sunlight there will be in a day. With a given latitude, time and date, one can accurately determine when sunrise and sunset will occur. Areas with latitudes closer to the equator will have a more consistent range of solar insolation throughout the year. Whereas areas closer to the poles will have a greater variance during the summer and winter months due to their higher latitudes.

A tracking mount will increase the average peak sun hours for a solar power system. Think about a panel that is tracking the sun in the sky vs a panel that is fixed and not moving: you will see a higher efficiency ratio of productions. A 1-axis mount will track the sun from East to West from sunrise to sunset and move on a single axis of rotation. A 2-axis mount will track the Sun from East to West the same as a 1-axis mount would, but it will also track the angle of the sun in the sky as it slowly varies season to season. A 2-axis mount is more necessary in high latitude regions where the angle of the sun in the sky changes dramatically between each equinox.

There are more variables than latitude that can change average peak sun hours. Weather patterns and geography will influence solar insolation that reaches your system. Thick grey storm clouds for example will block out a lot of the sun to the point where there may be no peak sun hours in the middle of the day when the sun is usually very powerful. Trees and mountains can deflect the sunlight, so be sure your solar panel is selectively placed.

In Fairview you can look at the average peak sun hours of a fixed solar panel mount, which will be 4.5 hours. This number iis an estimate based on data of previous years. With a tracking mount in Fairview you could theoretically increase the amount of peak sun hours per with a 1-axis mount, and get 5 hours, or a 2-axis mount and potentially increase your average to 6.7 hours.


Solar Businesses in Fairview, Oregon




Leave a Reply

Your email address will not be published. Required fields are marked *