Brooklyn Solar Power Information & Peak Sun Hours

Solar Green Energy Summary for Brooklyn, Pennsylvania

Lattitude: 41.7512

Sunlight

Fixed Tilt Sunlight Hours: 4.1 hours per day

1-Axis Tilt Sunlight Hours: 5.1 hours per day

2-Axis Tilt Sunlight Hours: 5.3 hours per day

Looking at the average peak sunlight hours in Brooklyn is a valuable number for determining your solar power setup. Peak sunlight hours are only the hours a day in which the sunlight is strong enough for the solar panels to do their job. Not every hour of sunlight was created equal. For example, solar panels do not provide much use during early sunrise and sunset, and therefore you should not look at total hours of sunlight in a day, but instead focus on peak sunlight hours. Using this number will provide a much better estimate of your needs for setting up panels in Brooklyn, Pennsylvania.

If you’re using a fixed axis and fixed tilt solar panel, the ideal angle of the panel mount should be set at an angle equal to or close to the latitude of the location of the panel. Latitude is a valuable measurement to use when figuring how many daylight hours and the angle of the sun in the sky for your location. Since at locations with a higher latitude the sun will find itself at more variable angles in the sky throughout the year it is important to set the angle of the panel correctly and efficiently capture more peak sun hours. In the Northern Hemisphere the sun will be at lower angles in the Southern sky in the winter, and higher angles during the summer months, so the angle of the panel is crucial when trying to maximize output.

Although most things are out of our control, like the sunrise, sunset or the weather, we can control the angle and the kind of mount we use for a solar panel. The angle of the solar panel, if using a fixed mount, should generally be around the angle that is equal to the latitude of the location to maximize output. In the northern hemisphere, panels angles should be lower in the winter months and higher in the summer months As a fixed mount is set, it is ideal to place it at an angle that will capture the most sunlight during the year. A 1-axis tracking solar mount will track the sun across the sky from sunrise to sunset, but the angle will remain the same throughout the day. A 2-axis solar mount will track the sun throughout the day from East to West, but the angle will also change automatically as the seasons change and the angle of the sun in the sky changes. Thus, a 2-axis will have a higher rating of peak sun hours compared to the 1-axis or fixed.

The sun is a great ball of gas that rises and sets every day that the earth rotates while in orbit around the sun. Barring any major disasters this is a very predictable occurance every day. Latitude helps predict this even more, narrowing it down to the minute for sunrise and sunset. But some things aren’t as predictable that will greatly influence the efficiency of solar panels. Weather and cloud coverage for example can greatly diminish peak sun hours on any given day. Thick storm clouds will block a high percentage of the sun's rays, resulting in lower output of your solar panels. Weather needs to be factored into deciding when to use your system, or how much output one expects to get.

The average daily peak sunlight hours in Brooklyn, Pennsylvania is 4.1 hours. Use this number when trying to calculate your solar needs in Brooklyn. As you can see above, if you were to use a 1-Axis or 2-Axis panel then the daily average would increase to 5.1 hour and 5.3 hours, respectively.


Solar Businesses in Brooklyn, Pennsylvania




Leave a Reply

Your email address will not be published. Required fields are marked *