Valley Forge Solar Power Information & Peak Sun Hours

Solar Green Energy Summary for Valley Forge, Pennsylvania

Lattitude: 40.0971

Sunlight

Fixed Tilt Sunlight Hours: 4.8 hours per day

1-Axis Tilt Sunlight Hours: 5 hours per day

2-Axis Tilt Sunlight Hours: 5.6 hours per day

It goes without saying that throughout the year the amount of sunlight in any given day is going to vary. The time of year and weather will have a strong influence on daily sunshine. Looking at the average amount of peak sunshine hours in a day during an entire year stretch is a valuable exercise when trying to determine the amount and type of solar panels you need to install to power your business or your home. 4.8 peak sun hours means that in Valley Forge on average there are 4.8 hours a day where the sun is strong enough for solar panels to harness its energy. This number is less than the amount of total sunlight hours in a day because there are times during the day (ex. sunrise and sunset) where the sun is not strong enough to benefit solar panels.

If you’re using a fixed axis and fixed tilt solar panel, the ideal angle of the panel mount should be set at an angle equal to or close to the latitude of the location of the panel. Latitude is a valuable measurement to use when figuring how many daylight hours and the angle of the sun in the sky for your location. Since at locations with a higher latitude the sun will find itself at more variable angles in the sky throughout the year it is important to set the angle of the panel correctly and efficiently capture more peak sun hours. In the Northern Hemisphere the sun will be at lower angles in the Southern sky in the winter, and higher angles during the summer months, so the angle of the panel is crucial when trying to maximize output.

There are a few ways to increase average peak sun hours per year for your solar power system. One way is to use a tracking mount solar panel instead of a fixed tilt solar panel. A 1-axis mount will track the sun throughout the sky from sunrise to sunset, giving your panel a more efficient facing direction towards the sun throughout the day. A 2-axis solar panel will track the sun in the sky throughout the day, but also change and follow the angle of the sun in the sky throughout the year. Both of these axis system solar panels will produce higher average peak sun hours than a fixed solar panel.

Although weather predicting technology has greatly evolved over time, it is still a rather unpredictable factor that will affect the amount of peak sun hours your solar power system will receive. Cloudy days for example will usually have lower peak sun hours that a clear sunny day. And areas that usually have more average sunny days per year will probably have higher peak sun hours that areas that are often overcast or stormy.

By taking the latitude of Valley Forge one can get a close estimate of the amount of average peak sun hours per day for the geographical area. It varies with technology and the type of solar panel mount you use, but for a fixed mount solar panel in Valley Forge one can expect close to 4.8 average peak sun hours per day. With a 1-axis tracking mount you would get 5 hours per day, and 5.6 hours per day with a 2-axis tracking mount that tracks the sun everywhere in the sky.


Solar Businesses in Valley Forge, Pennsylvania




Leave a Reply

Your email address will not be published. Required fields are marked *