Home » Solar Turbine » Washington » Davenport

Peak sun hours is one of the most important criteria to examine when considering installing a solar power system. Peak sun hours are different than total sunlight hours in a day because the strength of the radiation of the sun varies throughout the day. For example, during sunrise and sunset the solar insolation from the sun is less powerful than at noon. For a moment of sunshine to be considered a peak sun hour the intensity needs to be at least 1 kilowatt per square meter. This means that a square meter of your solar panel should be receiving 1 kilowatt of energy from the sun. This number is used because it is an amount of light that allows a solar panel to produce output efficiently and not under perform due to lack of sunlight power.

Knowing that the latitude of Davenport is 47.7 can be helpful for understanding total sunlight hour variance. As you approach the equator latitude approaches zero. The closer the latitude is to zero, the more consistent the daily sunlight hours are throughout the year. Total sunlight hour consistency simply makes planning for your solar power needs easier, but it is certainly not a requirement.

Throughout the day the sun obviously moves throughout the Davenport sky. The suns position in the sky also changes throughout the year with the seasons. A fixed solar panel does not accommodate for these changes. However, a 1-axis panel rotates and follows the sun’s path during the day. A 2-axis panel both follows the sun’s daily path as well as the seasonal differences

Climate in your geographical region is a major factor that will influence average peak sun hours per year. If you live in a region that does not have a lot of completely sunny days, then cloud coverage will greatly influence solar insolation on any given day. Mountains and trees may also contribute to lower solar insolation if they block the sun from your panels at any given point of the day.

In Davenport the average yearly peak sun hours for a fixed tilt non-tracking solar panel mount is 4. This is for a fixed panel mounted at an angle that is equal to the latitude of the location for the entire year. The amount of peak sun hours increases to 5 hours if you are using a 1-axis panel, and to 6.4 hours if you upgrade to a 2-axis solar panel.