Melbourne Village Solar Power Information & Peak Sun Hours

Solar Green Energy Summary for Melbourne Village, Florida

Lattitude: 28.0879

Sunlight

Fixed Tilt Sunlight Hours: 6.1 hours per day

1-Axis Tilt Sunlight Hours: 6.9 hours per day

2-Axis Tilt Sunlight Hours: 7.6 hours per day

The average peak sun hours of Melbourne Village is a crucial measurable component needed to efficiently implement a solar power system in a home or business. Put simply, peak sun hours are the hours of sunlight a day that are strong enough to be efficiently absorbed by solar panels and eventually turned into usable electricity. Not every minute of sunlight during a day is strong enough to be useful to a solar power system. Think about just minutes after the sunrises, which officially counts towards total hours of sunlight, but is usually too weak to be counted in peak sun hours because the strength of the solar insolation is not strong enough near the horizon to be absorbed and turned into electricity at an efficient rate. Times during the day like this, where the sun is out but not strong enough, are not counted as peak sun hours. In other words, the amount of peak sun hours in a location will theoretically always be less than total sunlight hours for a given day.

The latitude of the location is important for measuring peak sun hours. The latitude determines how much overall sunlight there will be in a day. With a given latitude, time and date, one can accurately determine when sunrise and sunset will occur. Areas with latitudes closer to the equator will have a more consistent range of solar insolation throughout the year. Whereas areas closer to the poles will have a greater variance during the summer and winter months due to their higher latitudes.

Although most things are out of our control, like the sunrise, sunset or the weather, we can control the angle and the kind of mount we use for a solar panel. The angle of the solar panel, if using a fixed mount, should generally be around the angle that is equal to the latitude of the location to maximize output. In the northern hemisphere, panels angles should be lower in the winter months and higher in the summer months As a fixed mount is set, it is ideal to place it at an angle that will capture the most sunlight during the year. A 1-axis tracking solar mount will track the sun across the sky from sunrise to sunset, but the angle will remain the same throughout the day. A 2-axis solar mount will track the sun throughout the day from East to West, but the angle will also change automatically as the seasons change and the angle of the sun in the sky changes. Thus, a 2-axis will have a higher rating of peak sun hours compared to the 1-axis or fixed.

Looking at latitude, average peak sun hours and various data can obviously help when planning for your solar power needs. The one thing you can never fully account for is changing weather. Storms, rain, cloud coverage all have an impact on solar panel capabilities.

In Melbourne Village you can look at the average peak sun hours of a fixed solar panel mount, which will be 6.1 hours. This number iis an estimate based on data of previous years. With a tracking mount in Melbourne Village you could theoretically increase the amount of peak sun hours per with a 1-axis mount, and get 6.9 hours, or a 2-axis mount and potentially increase your average to 7.6 hours.


Solar Businesses in Melbourne Village, Florida




Leave a Reply

Your email address will not be published. Required fields are marked *