Dayton Solar Power Information & Peak Sun Hours

Solar Green Energy Summary for Dayton, Maryland

Lattitude: 39.2393

Sunlight

Fixed Tilt Sunlight Hours: 4.2 hours per day

1-Axis Tilt Sunlight Hours: 5.4 hours per day

2-Axis Tilt Sunlight Hours: 6 hours per day

If you put your solar powered math calculator in your backpack it will turn off from the lack of sunlight needed to power the device. As you slowly open your backpack and begin to let sunlight in, the calculator will eventually turn on when the amount of sunlight is enough to power the calculator. Similarly, peak sun hours refer to the hours of they day where the sunlight is strong enough to power a solar panel. This is different from total sunlight hours, which is simply the amount of hours in a day when there is any sunlight.

If you open the newspaper in the morning or watch the weather channel on the news you can get an accurate prediction of sunrise and sunset each day for Dayton. However, still knowing that the latitude of Dayton is 39.2 can be a helpful number for your solar panel setup and planning. The closer your latitude is to zero the closer you are to the equator. At the equator you find the most consistent total sunlight hours throughout any given day of the year. As your latitude increases you can see larger discrepancies of daily sunlight hours during the year. For example, having very long summer days and very short and dark winter days

Since a fixed solar panel is set in one position it is ideal to place it at an angle that will expose the panel to the most sunlight throughout the year. This angle is generally the same angle of your latitude which is 39.2 for Dayton. You do not need to strategically place a 1-axis or 2-axis panel as much as you do a fixed panel. A 1-axis panel follows the movement of the sun during the day. Additionally, a 2-axis panel also adjusts for the suns various positions in the sky throughout the year.

There are more variables than latitude that can change average peak sun hours. Weather patterns and geography will influence solar insolation that reaches your system. Thick grey storm clouds for example will block out a lot of the sun to the point where there may be no peak sun hours in the middle of the day when the sun is usually very powerful. Trees and mountains can deflect the sunlight, so be sure your solar panel is selectively placed.

In Dayton you can look at the average peak sun hours of a fixed solar panel mount, which will be 4.2 hours. This number iis an estimate based on data of previous years. With a tracking mount in Dayton you could theoretically increase the amount of peak sun hours per with a 1-axis mount, and get 5.4 hours, or a 2-axis mount and potentially increase your average to 6 hours.


Solar Businesses in Dayton, Maryland




Leave a Reply

Your email address will not be published. Required fields are marked *