Home » Solar Turbine » Oregon » Bay City

The amount of hours from sunrise to sunset is equal to the total sunlight hours in a 24 hour period. Similarly, peak sun hours are the amount of total sunlight hours in a 24 hour period that are strong enough to provide power from being captured by a solar panel. Not every hour of sunlight delivers the same amount of energy resources. The sunlight at sunrise does not provide as many resources as the amount of sunlight mid-day. Thus, looking at the average peak sunlight hours for Bay City is valuable for calculating your solar needs.

The equator has a latitude of zero while Bay City has a latitude of 45.5. Any city located on the equator will receive the most sunlight throughout the year because the sunlight arrives at a perpendicular 90 degree angle to the earth at the equator. The further you are from the equator the more your daily sunlight hours can vary.

Depending on your output needs, to get more out of your solar panels you can either upgrade your technology, buy more panels, or buy different tracking type panels. A fixed solar panel remains fixed at one angle throughout the year. A 1-axis panel will produce more output because it follows the path of the sun from sunrise to sunset to maximize sun exposure. Even more productive is a 2-axis panel that not only follows the sun's path throughout the day, but also accounts for the more subtle sun changes throughout the year with the different seasons.

Although weather predicting technology has greatly evolved over time, it is still a rather unpredictable factor that will affect the amount of peak sun hours your solar power system will receive. Cloudy days for example will usually have lower peak sun hours that a clear sunny day. And areas that usually have more average sunny days per year will probably have higher peak sun hours that areas that are often overcast or stormy.

The average daily peak sunlight hours in Bay City, Oregon is 4.5 hours. Use this number when trying to calculate your solar needs in Bay City. As you can see above, if you were to use a 1-Axis or 2-Axis panel then the daily average would increase to 5 hour and 6.7 hours, respectively.