Warrensville Solar Power Information & Peak Sun Hours

Solar Green Energy Summary for Warrensville, Pennsylvania

Lattitude: 41.3265

Sunlight

Fixed Tilt Sunlight Hours: 4.2 hours per day

1-Axis Tilt Sunlight Hours: 5.3 hours per day

2-Axis Tilt Sunlight Hours: 5.4 hours per day

The average peak sun hours of Warrensville is a crucial measurable component needed to efficiently implement a solar power system in a home or business. Put simply, peak sun hours are the hours of sunlight a day that are strong enough to be efficiently absorbed by solar panels and eventually turned into usable electricity. Not every minute of sunlight during a day is strong enough to be useful to a solar power system. Think about just minutes after the sunrises, which officially counts towards total hours of sunlight, but is usually too weak to be counted in peak sun hours because the strength of the solar insolation is not strong enough near the horizon to be absorbed and turned into electricity at an efficient rate. Times during the day like this, where the sun is out but not strong enough, are not counted as peak sun hours. In other words, the amount of peak sun hours in a location will theoretically always be less than total sunlight hours for a given day.

The latitude of the location is important for measuring peak sun hours. The latitude determines how much overall sunlight there will be in a day. With a given latitude, time and date, one can accurately determine when sunrise and sunset will occur. Areas with latitudes closer to the equator will have a more consistent range of solar insolation throughout the year. Whereas areas closer to the poles will have a greater variance during the summer and winter months due to their higher latitudes.

Although most things are out of our control, like the sunrise, sunset or the weather, we can control the angle and the kind of mount we use for a solar panel. The angle of the solar panel, if using a fixed mount, should generally be around the angle that is equal to the latitude of the location to maximize output. In the northern hemisphere, panels angles should be lower in the winter months and higher in the summer months As a fixed mount is set, it is ideal to place it at an angle that will capture the most sunlight during the year. A 1-axis tracking solar mount will track the sun across the sky from sunrise to sunset, but the angle will remain the same throughout the day. A 2-axis solar mount will track the sun throughout the day from East to West, but the angle will also change automatically as the seasons change and the angle of the sun in the sky changes. Thus, a 2-axis will have a higher rating of peak sun hours compared to the 1-axis or fixed.

Weather is a big determinate of average peak sun hours each day. There are many aspects of weather that can increase or lessen the peak sun hours in a day in a particular location. For example cloud coverage is a crucial variable. And more importantly, what type of cloud coverage; thin scattered clouds will have less diminishing power on the solar insolation than thick rainy storm clouds. Sometimes long periods of sunny days are rare in certain locations, this would increase average peak sun hours for that time-frame

We can use previous years of data to estimate the amount of peak sun hours in Warrensville. A fixed tilt mount for example will receive 4.2 average hours per day. For more efficiency for your system in Warrensville you could use a 1-axis tracking mount and increase your daily peak sun average to 5.3 hours, or even further with a 2-axis panel to get an average of 5.4 hours.


Solar Businesses in Warrensville, Pennsylvania




Leave a Reply

Your email address will not be published. Required fields are marked *