Cut and Shoot Solar Power Information & Peak Sun Hours

Solar Green Energy Summary for Cut and Shoot, Texas

Lattitude: 30.3404

Sunlight

Fixed Tilt Sunlight Hours: 5.3 hours per day

1-Axis Tilt Sunlight Hours: 6.9 hours per day

2-Axis Tilt Sunlight Hours: 7.6 hours per day

Looking at the average peak sunlight hours in Cut and Shoot is a valuable number for determining your solar power setup. Peak sunlight hours are only the hours a day in which the sunlight is strong enough for the solar panels to do their job. Not every hour of sunlight was created equal. For example, solar panels do not provide much use during early sunrise and sunset, and therefore you should not look at total hours of sunlight in a day, but instead focus on peak sunlight hours. Using this number will provide a much better estimate of your needs for setting up panels in Cut and Shoot, Texas.

Knowing that the latitude of Cut and Shoot is 30.3 can be helpful for understanding total sunlight hour variance. As you approach the equator latitude approaches zero. The closer the latitude is to zero, the more consistent the daily sunlight hours are throughout the year. Total sunlight hour consistency simply makes planning for your solar power needs easier, but it is certainly not a requirement.

Although most things are out of our control, like the sunrise, sunset or the weather, we can control the angle and the kind of mount we use for a solar panel. The angle of the solar panel, if using a fixed mount, should generally be around the angle that is equal to the latitude of the location to maximize output. In the northern hemisphere, panels angles should be lower in the winter months and higher in the summer months As a fixed mount is set, it is ideal to place it at an angle that will capture the most sunlight during the year. A 1-axis tracking solar mount will track the sun across the sky from sunrise to sunset, but the angle will remain the same throughout the day. A 2-axis solar mount will track the sun throughout the day from East to West, but the angle will also change automatically as the seasons change and the angle of the sun in the sky changes. Thus, a 2-axis will have a higher rating of peak sun hours compared to the 1-axis or fixed.

Weather is one of the major culprits that will cause inconsistent total peak sun hours for any given day. The sunrise and sunset will always be predictable every day, but the weather is hard to predict and cloud coverage can greatly diminish the efficiency of a solar power system on any given day. On the bright side, a location that is known to have cloudy weather a majority of the year could have unexpectedly more sunny days, so it can go both ways.

Since we know the latitude of Cut and Shoot we can take the average amount of total sunlight hours and estimate that with a fixed solar panel there would be an average of 5.3 peak sun hours per day. 6.9 hours per day with a 1-axis tracking mount that tracks the sun from sunrise to sunset, and 7.6 hours with a 2-axis tracking mount that tracks the sun everywhere in the sky.


Solar Businesses in Cut and Shoot, Texas




Leave a Reply

Your email address will not be published. Required fields are marked *