Janesville Solar Power Information & Peak Sun Hours

Solar Green Energy Summary for Janesville, Wisconsin

Lattitude: 42.6855

Sunlight

Fixed Tilt Sunlight Hours: 4.6 hours per day

1-Axis Tilt Sunlight Hours: 5.3 hours per day

2-Axis Tilt Sunlight Hours: 6 hours per day

If you put your solar powered math calculator in your backpack it will turn off from the lack of sunlight needed to power the device. As you slowly open your backpack and begin to let sunlight in, the calculator will eventually turn on when the amount of sunlight is enough to power the calculator. Similarly, peak sun hours refer to the hours of they day where the sunlight is strong enough to power a solar panel. This is different from total sunlight hours, which is simply the amount of hours in a day when there is any sunlight.

If you open the newspaper in the morning or watch the weather channel on the news you can get an accurate prediction of sunrise and sunset each day for Janesville. However, still knowing that the latitude of Janesville is 42.7 can be a helpful number for your solar panel setup and planning. The closer your latitude is to zero the closer you are to the equator. At the equator you find the most consistent total sunlight hours throughout any given day of the year. As your latitude increases you can see larger discrepancies of daily sunlight hours during the year. For example, having very long summer days and very short and dark winter days

Depending on your output needs, to get more out of your solar panels you can either upgrade your technology, buy more panels, or buy different tracking type panels. A fixed solar panel remains fixed at one angle throughout the year. A 1-axis panel will produce more output because it follows the path of the sun from sunrise to sunset to maximize sun exposure. Even more productive is a 2-axis panel that not only follows the sun's path throughout the day, but also accounts for the more subtle sun changes throughout the year with the different seasons.

Weather is one of the major culprits that will cause inconsistent total peak sun hours for any given day. The sunrise and sunset will always be predictable every day, but the weather is hard to predict and cloud coverage can greatly diminish the efficiency of a solar power system on any given day. On the bright side, a location that is known to have cloudy weather a majority of the year could have unexpectedly more sunny days, so it can go both ways.

We can use previous years of data to estimate the amount of peak sun hours in Janesville. A fixed tilt mount for example will receive 4.6 average hours per day. For more efficiency for your system in Janesville you could use a 1-axis tracking mount and increase your daily peak sun average to 5.3 hours, or even further with a 2-axis panel to get an average of 6 hours.


Solar Businesses in Janesville, Wisconsin




Leave a Reply

Your email address will not be published. Required fields are marked *